PD220 Potato Planter (Manual - Rapid Pallet - Two Rows)


  • PD220 Potato Planter was designed for planting whole and cut potato seeds in a rapid and more professional manner for bigger sized fields.
  • Manual potato planting is performed with the help of two workers.
  • Plantation distance on rows can be adjusted by using the gears on the machine.
  • Planter tines can be adjusted according to suitable plantation depths and seeds are dropped onto the same depth.
  • The amount of plantation on each row is the same.
  • The furrows created are at equal distances to each other.
  • Ploughshares made of a special heat-treated steel are resistant against wearing.


Length :   1500 mm
Width :   1895 mm
Height :   1370 mm
Weight :   410 kg
Connection Type :   Three Point Hitch System (Category II)


Number of Working Rows :   2 Rows
Tractor Power :   40 - 50 HP
Powered by :   Own Wheel
Seed Storage Capacity    :   300 kg (Might Change According To Seed Dimensions)
Row Distance :   680 - 700 - 720 mm (Type 1) / 730 - 750- 770 mm (Type 2)
Tuber Plantation Distance :   150 mm - 400 mm Stepless Gear Setting
Ploughshare Hardness :   46 - 50 HRC
Working Width :   1360 mm - 1500 mm Adjustment
Working Depth :   150 mm - 250 mm
Capacity :   2.2 - 2.6  da/h
Seed Pot Type :   Round Metal


The machine is connected to a tractor through a three-point hitch mechanism. Seeds prepared in advance for plantation are filled into the storage. The potato seeds inside the storage come in front of planter workers who are seated on the backside of the machine through three sections. The potatoes which are manually taken from the section of the seed storage are placed one by one into the moving built-in metal sockets on the endless chain. With the turning movement of the sockets, seeds are carried to the vertical groove. And from there, they are dropped to the bed opened by the seed planter tine. Plantation is completed by covering the dropped seeds with the help of furrow closing moldboard tines.